433MHz AC 230V Wireless 2CH RF Remote Switch 10A

DKK195.00 inkl. moms

433MHz AC 230V Wireless 2CH RF Remote Switch 10A.

På lager

Fortæl andre om dette produkt.

Email
Varenummer (SKU): 2141 Kategori: Tags: , , , , , , ,

Beskrivelse

433MHz AC 230V Wireless 2CH RF Remote Switch 10A.

Tekniske detaljer:

Input Power: AC90-250V
Standby Current: <5MA
RF Frequency: 433M
RF working mode: superheterodyne
Receive sensitivity: <-108dbm
Transmitting distance: >50m ( open space)
Decoding mode: MCU software decoding
Remote storage: 20pcs
Support remote type:EV1527 Learning code, Fixed code
Working mode: Momentary, Toggle, Latching,Automatic energize when power on mode
Wiring type: fixed terminal
Output Te Wiring type rminal: NO , NC , COM
Dimension of PCB:55*32mm (L,W)

Wiring diagram:
NO: Output , normal open;
COM:Output , common ;
NC: Output , normal close.

Working mode:
1.Momentary mode:
Push the remote button , the relay connects, release the
remote button , the relay dis-connects.
2.Toggle mode:Push once the remote button , the relay
connects , push twice the remote button , the relay
dis-connects .
3.Latching mode:Push the remote button A, the relay
connects, push the remote button B, the relay dis-connect.
4.Automatic energize when power on mode: when
power supply, the relay connects.

Receiver operating mode Settings
1.Learning the code :(momentary)
Push the learning key on the receiver once time ,it comes
into momentary setting mode .Wait for a moment ,the LED
will be on, it comes into learning state .Push the remote
button ,LED indicator on the receiver board will flash 3
times and then come off ,learning successfully.

2. Learning the code: ( Toggle )
Push the learning key on the receiver twice time , it comes
into toggle setting mode Wait for a moment ,the LED will be
on , it comes into learning state .Push the remote button ,
LED indicator on the receiver board will flash 3 times and
then come off, learning successfully.

3. Learning the code: ( Latching )
Note: When you choose for latching mode ,in order to learn
more remote control ,you need to learn two different button,
the first time learnt is for “ON”, the second time learnt for
“OFF”.For example : button A = ON , button B = OFF ,Push
the learning key on the receiver triple time , it comes into
latching mode .Wait for a moment , the LED indicator on the
receiver board will be on,Push the remote button A,LED
flash for 3 times .Push the remote button B .LED indicator
flash for 3 times and then come off, learning successfully.

4. Learning the code: (Automatic energize whenpower)
Push the learning key on the receiver eight times , it
comes into setting mode Wait for a moment , the LED
will be on , it comes into learning state .Push the remote
button,LED indicator on the receiver board will flash 3
times and then come off, learning successfully.

NOTE: The system can store for 20 pcs of remotes ,
if the remote get more than 20 pcs , the initial remote
control will be lost.

Kontakt os

Du er altid velkommen til at kontakte os på info@ardustore.dk, eller sende os en besked via messenger (Klik her) og vi vil hjælpe dig.

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Vær den første til at anmelde “433MHz AC 230V Wireless 2CH RF Remote Switch 10A”

Din e-mailadresse vil ikke blive publiceret.

Du kunne også være interesseret i...