Temperaturstyring Termostat DIY 12V 10A er en lille styring til at kontrollere temperaturen, med de 3 knapper indstilles temperaturen. “Temperatur” refererer til en måling af varmeenergien i et objekt eller et område. Det er en vigtig fysisk egenskab, der påvirker mange aspekter af vores daglige liv og er afgørende i videnskabelige, tekniske og industrielle sammenhænge.
Tekniske detaljer:
Temperature Control Range: -20-100°
Input Power Supply: DC 12V
Resolution Ratio: -9.9~99.9: 0.1°, other temperature is 1°
Temperature Measurement Accuracy: 0.1 °
Control Accuracy: 0.1 °
Return Difference Accuracy: 0.1 °
Refresh Rate: 0.5 S
Measuring Inputs: NTC(10K 0.5%)waterproof sensor
Output: 1 channel relay output, capacity =20A 125VAC,20A 14VDC
Environmental Requirement: -10~60°, humidity: 20%-85%
Size: Approx. 48.5 x 40mm / 1.9 x 1.5 inch
Overall Power Consumption: Quiescent current: ≤10MA, operating current ≤65MA
Indicator Light Direction: Flash shows start-up delay of refrigeration or heating, keep lighting shows the relay has closed
Nixie Tube: LL state shows open for sensor; please connect the sensor base on instruction,
HH state shows exceed measurement range, temperature controller would peremptory turn off the relay,
— state shows high temperature alarm
SCM control, intelligentize, easy operation, low power consumption
Outage setting, automatic memory
Control accuracy 0.1 °
Size: Approx. 67 x 42 x 18mm / 2.64 x 1.65 x 0.71 inch
Patch Cord Length: Approx. 1M / 39.37 inch, 2 pin port
Kontakt os
Du er altid velkommen til at kontakte os på info@ardustore.dk, eller sende os en besked via messenger (Klik her) og vi vil hjælpe dig.
Anmeldelser
Der er endnu ikke nogle anmeldelser.